Publications

  1. Reza Ugalde, A., Kesler, O., and Naguib, H. E., 2020, “Highly Stable Bifunctional Catalyst for Zn-Air Batteries: The Effect of a Nitrated Carbon Support on Co3O4 Activity,” Journal of Power Sources, 453(February), p. 227834.
  2. Cuglietta, M., Arevalo-Quintero, O., and Kesler, O., 2019, “Performance and Properties of Suspension Plasma Sprayed Metal-Supported Cu-Co-Ni-SDC SOFC Anodes in Methane,” Fuel Cells, 19(3), pp. 268–279.
  3. Kuhn, J., Gupta, M., Kesler, O., and Björklund, S., 2018, “The Effect of Fuel Electrode Roughness on the Properties of Plasma Sprayed Solid Oxide Cells,” Journal of The Electrochemical Society, 165(9), pp. F693–F701.
  4. Arevalo-Quintero, O., and Kesler, O., 2018, “Development of Bi-Layer Metal Substrate Architectures for Suspension Plasma Sprayed Solid Oxide Fuel Cells,” Fuel Cells, 18(4), pp. 466–475.
  5. Harris, J., Kuhn, J., and Kesler, O., 2017, “Atmospheric Plasma-Sprayed Metal-Supported Solid Oxide Fuel Cells with Varying Cathode Microstructures,” Journal of The Electrochemical Society, 164(4), pp. F441–F447.
  6. Aicart, J., Kuhn, J., and Kesler, O., 2017, “Performance of Non-Destructive Compressive Seals for Reversible Solid Oxide Cells,” Fuel Cells, 17(1), pp. 90–99.
  7. Harris, J., Yan, Y., Bateni, R., and Kesler, O., 2016, “Degradation of La0.6Sr0.4Co0.2Fe0.8O3–δ–Ce0.8Sm0.2O1.9 Cathodes on Coated and Uncoated Porous Metal Supports,” Fuel Cells, 16(3), pp. 319–329.
  8. Fan, E. S. C., Kuhn, J., and Kesler, O., 2016, “Suspension Plasma Spraying of La0.6Sr0.4Co0.2Fe0.8O3-δ Cathodes: Influence of Carbon Black Pore Former on Performance and Degradation,” Journal of Power Sources, 316, pp. 72–84.
  9. Yan, Y., Bateni, R., Harris, J., and Kesler, O., 2015, “Fabrication of Reactive Element Oxide Coatings on Porous Ferritic Stainless Steel for Use in Metal-Supported Solid Oxide Fuel Cells,” Surface and Coatings Technology, 272, pp. 415–427.
  10. Puranen, J., Laakso, J., Honkanen, M., Heinonen, S., Kylmälahti, M., Lugowski, S., Coyle, T. W., Kesler, O., and Vuoristo, P., 2015, “High Temperature Oxidation Tests for the High Velocity Solution Precursor Flame Sprayed Manganese-Cobalt Oxide Spinel Protective Coatings on SOFC Interconnector Steel,” International Journal of Hydrogen Energy, 40(18), pp. 6216–6227.
  11. MacWan, A., Marr, M., Kesler, O., and Chen, D. L., 2015, “Microstructure, Hardness, and Fracture Toughness of Suspension Plasma Sprayed Yttria-Stabilized Zirconia Electrolytes on Stainless Steel Substrates,” Thin Solid Films, 584, pp. 23–28.
  12. Kuhn, J., and Kesler, O., 2015, “Carbon Deposition Thresholds on Nickel-Based Solid Oxide Fuel Cell Anodes II. Steam:Carbon Ratio and Current Density,” Journal of Power Sources, 277, pp. 455–463.
  13. Kuhn, J., and Kesler, O., 2015, “Carbon Deposition Thresholds on Nickel-Based Solid Oxide Fuel Cell Anodes I. Fuel Utilization,” Journal of Power Sources, 277, pp. 443–454.
  14. Fan, E. S. C., and Kesler, O., 2015, “Deposition of Lanthanum Strontium Cobalt Ferrite (LSCF) Using Suspension Plasma Spraying for Oxygen Transport Membrane Applications,” Journal of Thermal Spray Technology, 24(6), pp. 1081–1092.
  15. Metcalfe, C., Lay-Grindler, E., and Kesler, O., 2014, “Characterization of Ni-YSZ Anodes for Solid Oxide Fuel Cells Fabricated by Solution Precursor Plasma Spraying with Axial Feedstock Injection,” Journal of Power Sources, 247, pp. 831–839.
  16. Marr, M., Kuhn, J., Metcalfe, C., Harris, J., and Kesler, O., 2014, “Electrochemical Performance of Solid Oxide Fuel Cells Having Electrolytes Made by Suspension and Solution Precursor Plasma Spraying,” Journal of Power Sources, 245, pp. 398–405.
  17. Kuhn, J., and Kesler, O., 2014, “Method for in Situ Carbon Deposition Measurement for Solid Oxide Fuel Cells,” Journal of Power Sources, 246, pp. 430–437.
  18. Metcalfe, C., Kuhn, J., and Kesler, O., 2013, “Characterization of Ni-YSZ Anodes for Solid Oxide Fuel Cells Fabricated by Suspension Plasma Spraying with Axial Feedstock Injection,” Journal of Power Sources, 243, pp. 172–180.
  19. Metcalfe, C., Harris, J., Kuhn, J., Marr, M., and Kesler, O., 2013, “Progress in Metal-Supported Axial-Injection Plasma Sprayed Solid Oxide Fuel Cells Using Nanostructured NiO-Y0.15Zr0.85O 1.925 Dry Powder Anode Feedstock,” Journal of Thermal Spray Technology, 22(5), pp. 599–608.
  20. Marr, M., Waldbillig, D., and Kesler, O., 2013, “The Influence of Process Equipment on the Properties of Suspension Plasma Sprayed Yttria-Stabilized Zirconia Coatings,” Journal of Thermal Spray Technology, 22(2–3), pp. 116–124.
  21. Marr, M., and Kesler, O., 2013, “Influence of Plasma Heat Flux on Segmentation Cracking and Permeability of Thin Suspension Plasma Sprayed Coatings,” Surface and Coatings Technology, 216, pp. 289–296.
  22. Marr, M., Metcalfe, C., Fan, E. S. C., and Kesler, O., 2013, “Improved Electrolyte Performance in Plasma Sprayed SOFCs by Electrode Modification,” ECS Electrochemistry Letters, 2(11), pp. 2013–2015.
  23. Macwan, A., Chen, D. L., Marr, M., and Kesler, O., 2013, “Residual Stresses in Suspension Plasma Sprayed Electrolytes in Metal-Supported Solid Oxide Fuel Cell Half Cells,” Journal of Power Sources, 221, pp. 397–405.
  24. Light, N., and Kesler, O., 2013, “Electrochemical Performance of Plasma Sprayed Cu-Co-SDC Mono-Layer and Cu-Co-SDC/Cu-YSZ Bi-Layered Anodes Manufactured from Coarse and Fine Feedstock Powders,” Journal of Power Sources, 232, pp. 389–400.
  25. Light, N., and Kesler, O., 2013, “Air Plasma Sprayed Cu-Co-GDC Anode Coatings with Various Co Loadings,” Journal of Power Sources, 233, pp. 157–165.
  26. Harris, J., Metcalfe, C., Marr, M., Kuhn, J., and Kesler, O., 2013, “Fabrication and Characterization of Solid Oxide Fuel Cell Cathodes Made from Nano-Structured LSCF-SDC Composite Feedstock,” Journal of Power Sources, 239, pp. 234–243.
  27. Cuglietta, M., Kuhn, J., and Kesler, O., 2013, “A Novel Hybrid Axial-Radial Atmospheric Plasma Spraying Technique for the Fabrication of Solid Oxide Fuel Cell Anodes Containing Cu, Co, Ni, and Samaria-Doped Ceria,” Journal of Thermal Spray Technology, 22(5), pp. 609–621.
  28. Cuglietta, M., Chaudhary, K. L., Ge, S., and Kesler, O., 2013, “Development of a Multi-Component Aqueous NiO, CuO, and Co3O4 Suspension for Use in Suspension Plasma Spraying of SOFC Anode Layers,” Powder Technology, 237, pp. 76–86.
  29. Bateni, M. R., Wei, P., Kesler, O., and Petric, A., 2013, “Characterization of Aluminum Coatings Formed on Porous Ferritic Stainless Steels by Pack Cementation,” Materials and Manufacturing Processes, 28(12), pp. 1314–1321.
  30. Poon, M., and Kesler, O., 2012, “The Influence of Pore Formers on the Microstructure of Plasma-Sprayed NiO-YSZ Anodes,” Journal of Power Sources, 210, pp. 204–217.
  31. Marr, M., and Kesler, O., 2012, “Permeability and Microstructure of Suspension Plasma-Sprayed YSZ Electrolytes for SOFCs on Various Substrates,” Journal of Thermal Spray Technology, 21(6), pp. 1334–1346.
  32. Lay, E., Metcalfe, C., and Kesler, O., 2012, “The Influence of Incorporating MgO into Ni-Based Cermets by Plasma Spraying on Anode Microstructural and Chemical Stability in Dry Methane,” Journal of Power Sources, 218, pp. 237–243.
  33. Harris, J., Qureshi, M., and Kesler, O., 2012, “Deposition of Composite LSCF-SDC and SSC-SDC Cathodes by Axial-Injection Plasma Spraying,” Journal of Thermal Spray Technology, 21(3–4), pp. 461–468.
  34. Cuglietta, M., and Kesler, O., 2012, “Relationship between Particle and Plasma Properties and Coating Characteristics of Samaria-Doped Ceria Prepared by Atmospheric Plasma Spraying for Use in Solid Oxide Fuel Cells,” Journal of Thermal Spray Technology, 21(3–4), pp. 448–460.
  35. Waldbillig, D., and Kesler, O., 2011, “Electrochemical Testing of Suspension Plasma Sprayed Solid Oxide Fuel Cell Electrolytes,” Journal of Power Sources, 196(13), pp. 5423–5431.
  36. Waldbillig, D., and Kesler, O., 2011, “Effect of Suspension Plasma Spraying Process Parameters on YSZ Coating Microstructure and Permeability,” Surface and Coatings Technology, 205(23–24), pp. 5483–5492.
  37. Arevalo-Quintero, O., Waldbillig, D., and Kesler, O., 2011, “An Investigation of the Dispersion of YSZ, SDC, and Mixtures of YSZ/SDC Powders in Aqueous Suspensions for Application in Suspension Plasma Spraying,” Surface and Coatings Technology, 205(21–22), pp. 5218–5227.
  38. Metcalfe, C., Kesler, O., Rivard, T., Gitzhofer, F., and Abatzoglou, N., 2010, “Connected Three-Phase Boundary Length Evaluation in Modeled Sintered Composite Solid Oxide Fuel Cell Electrodes,” Journal of The Electrochemical Society, 157(9), pp. B1326–B1335.
  39. Harris, J., and Kesler, O., 2010, “Atmospheric Plasma Spraying Low-Temperature Cathode Materials for Solid Oxide Fuel Cells,” Journal of Thermal Spray Technology, 19(1–2), pp. 328–335.
  40. Waldbillig, D., and Kesler, O., 2009, “The Effect of Solids and Dispersant Loadings on the Suspension Viscosities and Deposition Rates of Suspension Plasma Sprayed YSZ Coatings,” Surface and Coatings Technology, 203(15), pp. 2098–2101.
  41. Waldbillig, D., and Kesler, O., 2009, “Characterization of Metal-Supported Axial Injection Plasma Sprayed Solid Oxide Fuel Cells with Aqueous Suspension Plasma Sprayed Electrolyte Layers,” Journal of Power Sources, 191(2), pp. 320–329.
  42. Rose, L., Kesler, O., Decès-Petit, C., Troczynski, T., and Maric, R., 2009, “Characterization of Porous Stainless Steel 430 for Low- and Intermediate-Temperature Solid Oxide Fuel Cell (SOFC) Substrates,” International Journal of Green Energy, 6(6), pp. 638–645.
  43. Chhina, H., Susac, D., Campbell, S., and Kesler, O., 2009, “Transmission Electron Microscope Observation of Pt Deposited on Nb-Doped Titania,” Electrochemical and Solid-State Letters, 12(6), pp. 97–100.
  44. Chhina, H., Campbell, S., and Kesler, O., 2009, “Ex Situ and In Situ Stability of Platinum Supported on Niobium-Doped Titania for PEMFCs,” Journal of The Electrochemical Society, 156(10), p. B1232.
  45. Chhina, H., Campbell, S., and Kesler, O., 2009, “Characterization of Nb and W Doped Titania as Catalyst Supports for Proton Exchange Membrane Fuel Cells,” Journal of New Materials for Electrochemical Systems, 12(4), pp. 177–185.
  46. Benoved, N., and Kesler, O., 2009, “Air Plasma Spray Processing and Electrochemical Characterization of Cu-SDC Coatings for Use in Solid Oxide Fuel Cell Anodes,” Journal of Power Sources, 193(2), pp. 454–461.
  47. Zhang, X., Robertson, M., Decès-Petit, C., Xie, Y., Hui, R., Qu, W., Kesler, O., Maric, R., and Ghosh, D., 2008, “Solid Oxide Fuel Cells with Bi-Layered Electrolyte Structure,” Journal of Power Sources, 175(2), pp. 800–805.
  48. Zhang, X., Gazzarri, J., Robertson, M., Decès-Petit, C., and Kesler, O., 2008, “Stability Study of Cermet-Supported Solid Oxide Fuel Cells with Bi-Layered Electrolyte,” Journal of Power Sources, 185(2), pp. 1049–1055.
  49. White, B. D., Kesler, O., and Rose, L., 2008, “Air Plasma Spray Processing and Electrochemical Characterization of SOFC Composite Cathodes,” Journal of Power Sources, 178(1), pp. 334–343.
  50. White, B. D., and Kesler, O., 2008, “Implications of Electronic Short Circuiting in Plasma Sprayed Solid Oxide Fuel Cells on Electrode Performance Evaluation by Electrochemical Impedance Spectroscopy,” Journal of Power Sources, 177(1), pp. 104–110.
  51. Gazzarri, J. I., and Kesler, O., 2008, “Short-Stack Modeling of Degradation in Solid Oxide Fuel Cells. Part I. Contact Degradation,” Journal of Power Sources, 176(1), pp. 138–154.
  52. Gazzarri, J. I., and Kesler, O., 2008, “Short Stack Modeling of Degradation in Solid Oxide Fuel Cells. Part II. Sensitivity and Interaction Analysis,” Journal of Power Sources, 176(1), pp. 155–166.
  53. Chhina, H., Campbell, S., and Kesler, O., 2008, “High Surface Area Synthesis, Electrochemical Activity, and Stability of Tungsten Carbide Supported Pt during Oxygen Reduction in Proton Exchange Membrane Fuel Cells,” Journal of Power Sources, 179(1), pp. 50–59.
  54. Zhang, X., Robertson, M., Deĉes-Petit, C., Qu, W., Kesler, O., Maric, R., and Ghosh, D., 2007, “Internal Shorting and Fuel Loss of a Low Temperature Solid Oxide Fuel Cell with SDC Electrolyte,” Journal of Power Sources, 164(2), pp. 668–677.
  55. White, B. D., and Kesler, O., 2007, “Air Plasma Spraying of LSM/YSZ SOFC Composite Cathodes,” Advanced Materials Research, 15–17, pp. 299–304.
  56. Rose, L., Kesler, O., Tang, Z., and Burgess, A., 2007, “Application of Sol Gel Spin Coated Yttria-Stabilized Zirconia Layers for the Improvement of Solid Oxide Fuel Cell Electrolytes Produced by Atmospheric Plasma Spraying,” Journal of Power Sources, 167(2), pp. 340–348.
  57. Kesler, O., 2007, “Plasma Spray Processing of Solid Oxide Fuel Cells,” Materials Science Forum, 539–543, pp. 1385–1390.
  58. Hui, R., Wang, Z., Kesler, O., Rose, L., Jankovic, J., Yick, S., Maric, R., and Ghosh, D., 2007, “Thermal Plasma Spraying for SOFCs: Applications, Potential Advantages, and Challenges,” Journal of Power Sources, 170(2), pp. 308–323.
  59. Gazzarri, J. I., and Kesler, O., 2007, “Non-Destructive Delamination Detection in Solid Oxide Fuel Cells,” Journal of Power Sources, 167(2), pp. 430–441.
  60. Gazzarri, J. I., and Kesler, O., 2007, “Electrochemical AC Impedance Model of a Solid Oxide Fuel Cell and Its Application to Diagnosis of Multiple Degradation Modes,” Journal of Power Sources, 167(1), pp. 100–110.
  61. Chhina, H., Campbell, S., and Kesler, O., 2007, “Thermal and Electrochemical Stability of Tungsten Carbide Catalyst Supports,” Journal of Power Sources, 164(2), pp. 431–440.
  62. Chhina, H., Campbell, S., and Kesler, O., 2007, “Ex Situ Evaluation of Tungsten Oxide as a Catalyst Support for PEMFCs,” Journal of The Electrochemical Society, 154(6), p. B533.
  63. Ben-Oved, N., and Kesler, O., 2007, “A New Technique for the Rapid Manufacturing of Directoxidation Anodes for SOFC’s,” Advanced Materials Research, 15–17, pp. 287–292.
  64. Zhang, X., Robertson, M., Yick, S., Deĉes-Petit, C., Styles, E., Qu, W., Xie, Y., Hui, R., Roller, J., Kesler, O., Maric, R., and Ghosh, D., 2006, “Sm0.5Sr0.5CoO3 + Sm0.2Ce0.8O1.9 Composite Cathode for Cermet Supported Thin Sm0.2Ce0.8O1.9 Electrolyte SOFC Operating below 600 °C,” Journal of Power Sources, 160(2 SPEC. ISS.), pp. 1211–1216.
  65. Zhang, X., Robertson, M., Decès-Petit, C., Xie, Y., Hui, R., Yick, S., Styles, E., Roller, J., Kesler, O., Maric, R., and Ghosh, D., 2006, “NiO-YSZ Cermets Supported Low Temperature Solid Oxide Fuel Cells,” Journal of Power Sources, 161(1), pp. 301–307.
  66. Zhang, X., Decès-Petit, C., Yick, S., Robertson, M., Kesler, O., Maric, R., and Ghosh, D., 2006, “A Study on Sintering Aids for Sm0.2Ce0.8O1.9 Electrolyte,” Journal of Power Sources, 162(1), pp. 480–485.
  67. Rose, L., Menon, M., Kammer, K., Kesler, O., and Larsen, P. H., 2006, “Processing of Ce1-XGdxO2-δ (GDC) Thin Films from Precursors for Application in Solid Oxide Fuel Cells,” Advanced Materials Research, 15–17, pp. 293–298.
  68. Keshmiri, M., and Kesler, O., 2006, “Colloidal Formation of Monodisperse YSZ Spheres: Kinetics of Nucleation and Growth,” Acta Materialia, 54(16), pp. 4149–4157.
  69. Chhina, H., Campbell, S., and Kesler, O., 2006, “An Oxidation-Resistant Indium Tin Oxide Catalyst Support for Proton Exchange Membrane Fuel Cells,” Journal of Power Sources, 161(2), pp. 893–900.
  70. Kesler, O., Crews, L. K., and Gibson, L. J., 2003, “Creep of Sandwich Beams with Metallic Foam Cores,” Materials Science and Engineering A, 341(1–2), pp. 264–272.
  71. Kesler, O., and Gibson, L. J., 2002, “Size Effects in Metallic Foam Core Sandwich Beams,” Materials Science and Engineering A, 326(2), pp. 228–234.
  72. Kesler, O., Matejicek, J., Sampath, S., and Suresh, S., 1999, “Measurement of Residual Stress in Plasma-Sprayed Composite Coatings with Graded and Uniform Compositions,” Materials Science Forum, 308–311, pp. 389–395.
  73. Kesler, O., Matejicek, J., Sampath, S., Suresh, S., Gnaeupel-Herold, T., Brand, P. C., and Prask, H. J., 1998, “Measurement of Residual Stress in Plasma-Sprayed Metallic, Ceramic and Composite Coatings,” Materials Science and Engineering A, 257(2), pp. 215–224.
  74. Kesler, O., Finot, M., Suresh, S., and Sampath, S., 1997, “Determination of Processing-Induced Stresses and Properties of Layered and Graded Coatings: Experimental Method and Results for Plasma-Sprayed Ni-Al2O3,” Acta Materialia, 45(8), pp. 3123–3134.

 

  1. Kuhn, J., Gupta, M., Kesler, O., and Björklund, S., 2017, “The Effect of Fuel Electrode Roughness on the Properties of Plasma Sprayed Solid Oxide Cells,” ECS Transactions, pp. 1477–1487.
  2. Harris, J., Lay-Grindler, E., Metcalfe, C., and Kesler, O., 2017, “Degradation of Metal-Supported Cells with Ni-YSZ or Ni-Ni3Sn-YSZ Anodes Operated with Methane-Based Fuels,” ECS Transactions, pp. 1293–1304.
  3. Macwan, A., Marr, M., Kesler, O., and Chen, D. L., 2015, “Microstructure, Hardness, and Fracture Toughness of Suspension Plasma Sprayed Yttria-Stabilized Zirconia Electrolytes on Stainless Steel Substrates,” THIN SOLID FILMS, 584, pp. 23–28.
  4. Harris, J., Kuhn, J., and Kesler, O., 2015, “Atmospheric Plasma-Sprayed Metal-Supported Solid Oxide Fuel Cells with Varying Cathode Microstructures,” ECS Transactions, pp. 1779–1790.
  5. Marr, M., Metcalfe, C., Fan, E. S. C., and Kesler, O., 2013, “Improved Electrolyte Performance in Plasma Sprayed SOFCs by Electrode Modification,” ECS Transactions, pp. 1025–1035.
  6. Kesler, O., Cuglietta, M., Harris, J., Kuhn, J., Marr, M., and Metcalfe, C., 2013, “Progress in Metal-Supported SOFCs Using Hydrogen and Methane Fuels,” ECS Transactions, pp. 491–501.
  7. Marr, M., Waldbillig, D., and Kesler, O., 2012, “The Influence of Process Equipment on the Properties of Suspension Plasma Sprayed Yttria-Stabilized Zirconia Coatings,” Proceedings of the International Thermal Spray Conference, pp. 793–799.
  8. Metcalfe, C., Lay, E., and Kesler, O., 2011, “Measurement of Knudsen and Effective Ordinary Diffusion Coefficients in Solid Oxide Fuel Cell Anodes Fabricated by Atmospheric Plasma Spraying Using Powder, Suspension, and Solution Precursor Feedstocks,” ECS Transactions, pp. 1501–1511.
  9. Metcalfe, C., Lay, E., and Kesler, O., 2011, “Deposition of Nickel – Yttria Stabilized Zirconia and Nickel – Samaria Doped Ceria by Solution Precursor Plasma Spraying for Solid Oxide Fuel Cells,” Proceedings of the International Thermal Spray Conference, DVS, Hamburg, Germany.
  10. Marr, M., and Kesler, O., 2011, “A Substrate Surface Thermocouple for Thermal Spraying,” Proceedings of the International Thermal Spray Conference, DVS, Hamburg, Germany.
  11. Lay, E., Metcalfe, C., and Kesler, O., 2011, “Influence of Tertiary Phases Incorporated into Ni-Based Cermets by Solution Precursor Plasma Spraying (SPPS) on Anode Stability,” ECS Transactions, pp. 1303–1313.
  12. Harris, J., and Kesler, O., 2011, “Performance of Metal-Supported Composite and Single-Phase Cathodes Based on LSCF and SSC,” ECS Transactions, pp. 1927–1934.
  13. Harris, J., Qureshi, M., and Kesler, O., 2011, “Deposition of Composite LSCF-SDC and SSC-SDC Cathodes by Axial-Injection Plasma Spraying,” Proceedings of the International Thermal Spray Conference, DVS, Hamburg, Germany.
  14. Cuglietta, M., and Kesler, O., 2011, “Fabrication of Direct Oxidation Solid Oxide Fuel Cell Anodes Using a Novel Atmospheric Plasma Spraying Technique,” ECS Transactions, pp. 1781–1790.
  15. Cuglietta, M. J., and Kesler, O., 2011, “Relationship between Particle and Plasma Properties and Coating Characteristics of Samaria-Doped Ceria Prepared by Atmospheric Plasma Spraying for Use in Solid Oxide Fuel Cells,” Proceedings of the International Thermal Spray Conference, DVS, Hamburg, Germany.
  16. Zhang, X., Robertson, M., Decès-Petit, C., and Kesler, O., 2009, “Composite Cathode Study for Low Temperature SOFC,” ECS Transactions, IOP Publishing, p. 2463.
  17. Rose, L., Kesler, O., Decès-Petit, C., Troczynski, T., Sobolyeva, T., and Maric, R., 2009, “Characterization of Porous Stainless Steel 430 for Low and Intermediate Temperature Solid Oxide Fuel Cell Substrates,” Proceedings of the Hydrogen and Fuel Cells Conference.
  18. Metcalfe, C., Kesler, O., Rivard, T., Gitzhofer, F., and Abatzoglou, N., 2009, “Three-Phase Boundary Length Evaluation in Modeled Sintered Composite Solid Oxide Fuel Cell Electrodes,” ECS Transactions, pp. 1185–1194.
  19. Harris, J., and Kesler, O., 2009, “Fabrication of Composite LSCF-SDC Cathode Coatings by Plasma Spray Processing,” ECS Transactions, pp. 2455–2461.
  20. Harris, J., and Kesler, O., 2009, “Atmospheric Plasma Spraying (APS) Low-Temperature Cathode Materials for Solid Oxide Fuel Cells (SOFCs),” Proceedings of the International Thermal Spray Conference, pp. 1–6.
  21. Bateni, R., Nasirpour, M., and Kesler, O., 2009, “Synthesis of LNF Nano Particles for Fuel Cell Applications,” MRS Proceedings, Cambridge University Press, pp. 1230–MM06-08.
  22. Waldbillig, D., Tang, Z., Burgess, A., and Kesler, O., 2008, “Effect of Substrate and Cathode Parameters on the Properties of Suspension Plasma Sprayed Solid Oxide Fuel Cell Electrolytes,” Proceedings of the International Thermal Spray Conference, DVS, Maastricht, The Netherlands.
  23. Zhang, X., Deces-Petit, C., Yick, S., Robertson, M., Qu, W., Xie, Y., Hui, R., Styles, E., Roller, J., Kesler, O., Maric, R., and Ghosh, D., 2007, “A Study on Co and Cu Oxides as Sintering Aids for Sm0.2Ce0.8O1.9 Electrolyte,” THERMEC 2006, PTS 1-5, 539–543(1–5), pp. 1391–1396.
  24. Zhang, X., Robertson, M., Deôes-Petit, C., Qu, W., Kyong-Bok, M., Tuck, A., Xie, Y., Hui, R., Kesler, O., Marie, R., and Ghosh, D., 2007, “Fabrication and Characterization of Cermet Supported Cell with SDC Electrolyte,” ECS Transactions, pp. 899–903.
  25. White, B., Kesler, O., and Rose, L., 2007, “Electrochemical Characterization of Air Plasma Sprayed LSM/YSZ Composite Cathodes on Metallic Interconnects,” ECS Transactions, The Electrochemical Society, Nara, JAPAN, pp. 1107–1114.
  26. White, B. D., and Kesler, O., 2007, “Air Plasma Spraying of LSM/YSZ SOFC Composite Cathodes,” THERMEC 2006 SUPPLEMENT, 15–17, pp. 299–304.
  27. Waldbillig, D., Kesler, O., Tang, Z., and Burgess, A., 2007, “Suspension Plasma Spraying of Solid Oxide Fuel Cell Electrolytes,” Thermal Spray 2007: Global Coating Solutions, ASM International, Beijing, China, pp. 677–682.
  28. Tang, Z., Burgess, A., Kesler, O., White, B., and Ben-Oved, N., 2007, “Manufacturing Solid Oxide Fuel Cells with an Axial-Injection Plasma Spray System,” Thermal Spray 2007: Global Coating Solutions, ASM International, Beijing, China, pp. 309–312.
  29. Rose, L., Menon, M., Kammer, K., Kesler, O., and Larsen, P. H., 2007, “Processing of Ce1-XGdxO2-Delta (GDC) Thin Films from Precursors for Application in Solid Oxide Fuel Cells,” THERMEC 2006 SUPPLEMENT, 15–17, pp. 293–298.
  30. Rose, L., Kesler, O., Tang, Z., and Burgess, A., 2007, “Electrochemical Testing of Solid Oxide Fuel Cells with Sol Gel Impregnated Plasma Sprayed Electrolytes,” SOLID OXIDE FUEL CELLS 10 (SOFC-X), PTS 1 AND 2, 7(1), p. 623+.
  31. Rose, L., Tang, Z., Burgess, A., and Kesler, O., 2007, “Improvement of Plasma Sprayed Yttria Stabilized Zirconia (YSZ) Electrolytes for Solid Oxide Fuel Cells by Spin Coated Sol Gel Solutions,” Thermal Spray 2007: Global Coating Solutions, ASM International, Beijing, China, pp. 478–483.
  32. Kesler, O., 2007, “Plasma Spray Processing of Solid Oxide Fuel Cells,” THERMEC 2006, PTS 1-5, 539–543(1–5), pp. 1385–1390.
  33. Ben-Oved, N., and Kesler, O., 2007, “A New Technique for the Rapid Manufacturing of Direct-Oxidation Anodes for SOFC’s,” THERMEC 2006 SUPPLEMENT, 15–17, pp. 287–292.
  34. White, B. D., Kesler, O., Ben-Oved, N., and Burgess, A., 2006, “Preparation of an SOFC LSM/YSZ Composite Cathode by Air Plasma Spraying,” Proceedings of the International Thermal Spray Conference, ASM International, Seattle, Washington.
  35. Chhina, H., Campbell, S., and Kesler, O., 2006, “Oxidation Resistant Indium Tin Oxide Catalyst Support for Proton Exchange Membrane Fuel Cells,” Proceedings of the 210th Meeting of the Electrochemical Society, Cancun, Mexico.
  36. Zhang, X., Robertson, M., Decès-Petit, C., Xie, Y., Hui, R., Yick, S., Styles, E., Staite, M., Roller, J., Kesler, O., Qu, W., Jankovic, J., Tang, Z., Perednis, D., Maric, R., and Ghosh, D., 2005, “Ni-YSZ Cermet Substrate Supported Thin SDC and YSZ+SDC Bi-Layer SOFCs,” Conference of Metallurgists, MetSoc, Calgary, Alberta, Canada, p. 9.
  37. Jankovic, J., Hui, S. R., Roller, J., Kesler, O., Xie, Y., Maric, R., and Ghosh, D., 2005, “Deposition of Porous Cathodes Using Plasma Spray Technique for Reduced-Temperature SOFCs,” Conference of Metallurgists, MetSoc, Calgary, Alberta, Canada, p. 12.
  38. Gazzarri, J. I., and Kesler, O., 2005, “The Influence of a Delaminated Layer on the Impedance Spectrum of an Operating Solid Oxide Fuel Cell,” Conference of Metallurgists, MetSoc, Calgary, Alberta, Canada, p. 15.
  39. Kesler, O., and Landingham, R., 2002, “Improvements in Mechanical Behavior of SOFC Anodes,” SOLID STATE IONICS-2002, 756, pp. 539–544.

 

  1. Kesler, O., 2009, “Processing,” Solid Oxide Fuel Cells: Materials Properties and Performance, CRC Press, Boca Raton, p. 298.